MIG Shield (5% CO2 in Argon mix) gas is the UK’s most popular mix for MIG/GMAW mild steel. Ideal for welding thin sections such as car panels, the mix of Argon, CO2 and Oxygen gives the perfect blend between arc stability, penetration and reduced spatter.
Ryval Mig Shield conforms to BS EN ISO 14175 and comes with a standard valve outlet for your convenience.
Our MIG Sheild gas cylinders are completely RENT FREE.
With 2 litres of gas, which could give almost an hour of weld time*, Ryval’s “EXTRA SMALL” package is the equivalent of almost 9 disposable canisters so represents great value for money.
Standard valve outlet - BS No.3: 5/8" BSP RH INT Valve
* based on a flow rate below 10 l/min
Great for...
- 2L cylinder perfect for hobbyists and small businesses
- 10L cylinder for professional welders
- MIG/GMAW welding
- Thin section mild steel up to 4mm thick
- Sheet metal work and car repairs
- Can also be used for TIG/GTAW welding stainless steel for non-critical applications
But beware...
- Take care if using to weld thicker sections to ensure weld integrity
- Thicker sections usually require a mix with higher CO2 content
- Should not be used to weld L-grade stainless steels
- Check detail on the MSDS
Other info...
2 Litre
- Approx. Dimension (cm) - 47 x 11
- Approx. Gross Weight - 5 kg
- Approx. Nominal Contents - 0.49 M3
- Outlet valve - BS No.3: 5/8" BSP RH INT Valve
- Shipping weight - 5.5kg
10 Litre
- Approx. Dimension (cm) - 94 x 14
- Approx. Gross Weight - 19 kg
- Approx. Nominal Contents - 2.4 M3
- Outlet valve - BS No.3: 5/8" BSP RH INT Valve
- Shipping weight - 20kg
